SLITTING SAWS are recommended for slotting the fragile and hard materials. A tooth form is suitable especially for thin saw blades with tooth pitch from 0,8 mm to 3,0 mm. Cutting edge is very sharp. Chip clearance is reduced and it cannot remove longer chips away from the cutting area efficiently. Slitting saws in both high speed and super high speed steels suitable for milling, and grooving steels and alloys on manual, semi-automatic and fully automatic machines. The saw blade range is ø 15 mm - ø 315 mm with thicknesses ranging 0,2 mm - 6 mm in variable designs with tooth forms: A - B - BW. All standard saws are available ground only but also with VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
In both high speed and super high speed steel suitable for slotting screws in all types of steels and alloys. The saw blades are all flat ground (without hub) and the entire range is executed with tooth form "A". The saw blade range is ø 80 mm, ø 100 mm and ø 125 mm. Blade thicknesses range from 0,7 mm - 2 mm in decimal increments.
In both high speed and super high speed steel suitable for goldsmith´s cutting and machining purposes. The saw blades are all with hollow ground (with a hub) and the entire range is executed with tooth pitches finer than 1 millimetre.
in both high speed and super high steel suitable for cutting tubes sized ø 10 mm - ø 325 mm, with wall thickness ranging 2 mm - 10 mm, in both standard steels and high alloy steels (stainless). The saw blade range is ø 63 mm, ø 68 mm and ø 75 mm. Blade thicknesses are 1,2 mm, 1,6 mm and 2,0 mm and the tooth form is "Bw".
The video showing VHM and HSS slitting saw blades you find on channel YouTube, or in our video gallery.
The above-mentioned examples of milling cutters are only a small overview of our production posibilities. We are ready to produce also different tools according to your documentation like prismatic cutters, gear milling cutters, profile cutters, shell end mills cutters, side and face milling cutters, halfcircle milling cutters convex, half circle milling cutters concave, corner rounding milling cutters, single angle milling cutters, double angle milling cutters , HSS Side Chip Clearance Saws straight teeth, Slitting saw, M2 Side Chip Clearance Saws staggered tooth, HSS Side and Face Cutters straight teeth, HSS Side and Face Cutters staggered teeth.
